Dewalt Dcn692b: Top-notch Specifications, Comprehensive Comparisons, And Trusted Buying Sources
DeWalt DCN692B Information
the information about the DeWalt DCN692B framing nailer:
Introduction
The DeWalt DCN692B is a 20V MAX XR brushless cordless framing nailer that is designed for heavy-duty framing applications. It features a dual-speed motor that provides the power to drive nails up to 3-1/2 inches long, as well as a tool-free depth adjustment for precise nail placement. The nailer also has a stall release lever to clear jams, an adjustable rafter hook, and a dry fire lockout to prevent accidental firing.
Specifications
- Voltage: 20V MAX XR
- Motor: Brushless
- Speed: 0-4600 BPM
- Depth of drive: 1-3/4 to 3-1/2 inches
- Magazine capacity: 55 nails
- Weight: 5.9 pounds
Features
- Dual-speed motor for driving a wide range of fasteners
- Tool-free depth adjustment for precise nail placement
- Stall release lever to clear jams
- Adjustable rafter hook
- Dry fire lockout to prevent accidental firing
- 33-degree magazine holds up to 55 paper collated nails
- Capable of driving 3-1/2-inch fasteners into dense lumber
What's in the box
- DeWalt DCN692B framing nailer
- No-mar tip
- Instruction manual
Pricing
The DeWalt DCN692B framing nailer is available for purchase online and at most major home improvement stores. The price typically ranges from $500 to $600.
Conclusion
The DeWalt DCN692B is a powerful and versatile framing nailer that is ideal for heavy-duty applications. It is well-made, easy to use, and has a number of features that make it a top choice for professional framers.
Here is a table of the full specifications of the DeWalt DCN692B:
| Specification | Value |
|---|---|
| Voltage | 20V MAX XR |
| Motor | Brushless |
| Speed | 0-4600 BPM |
| Depth of drive | 1-3/4 to 3-1/2 inches |
| Magazine capacity | 55 nails |
| Weight | 5.9 pounds |
| Features | Dual-speed motor, tool-free depth adjustment, stall release lever, adjustable rafter hook, dry fire lockout, 33-degree magazine, 55-nail capacity |
| What's in the box | DeWalt DCN692B framing nailer, no-mar tip, instruction manual |
| Pricing | $500 to $600 |
I hope this information is helpful. Please let me know if you have any other questions.
DeWalt DCN692B Compare with Similar Item
a table comparison of the DeWalt DCN692B and some similar items:
| Feature | DeWalt DCN692B | Makita XFD07Z | Bosch GCM12SD |
|---|---|---|---|
| Cutting capacity | 2x12 inches | 2x12 inches | 2x12 inches |
| Bevel capacity | 45 degrees left and right | 45 degrees left and right | 45 degrees left and right |
| Plunge depth | 3-1/2 inches | 3-1/2 inches | 3-1/2 inches |
| Cutting speed | 3,500 SPM | 3,600 SPM | 3,400 SPM |
| Weight | 13.6 pounds | 13.8 pounds | 14.4 pounds |
| Price | $599 | $649 | $699 |
As you can see, the DeWalt DCN692B is a very capable saw, and it is priced competitively. It has a slightly lower cutting speed than the Makita XFD07Z and Bosch GCM12SD, but it is also lighter. Ultimately, the best saw for you will depend on your individual needs and preferences.
Here is a more detailed comparison of the three saws:
DeWalt DCN692B
- Pros: Lightweight, powerful, versatile
- Cons: Lower cutting speed than some competitors
Makita XFD07Z
- Pros: Powerful, versatile, long battery life
- Cons: Heavier than some competitors
Bosch GCM12SD
- Pros: Powerful, accurate, long warranty
- Cons: Heaviest of the three saws
I hope this helps!
DeWalt DCN692B Where To Buy
some places where you can buy the DeWalt DCN692B and spare parts:
- DeWalt Direct: This is the official DeWalt website, so you can be sure that you're getting genuine parts. They also have a wide selection of spare parts available, so you're likely to find what you need.
- Walmart: Walmart is a great place to find affordable tools and accessories. They often have sales on DeWalt products, so you can save some money.
- Amazon: Amazon is another great option for finding DeWalt products. They have a wide selection of tools and accessories available, and you can often find them on sale.
- Best Buy: Best Buy is a good option if you're looking for a brick-and-mortar store where you can buy DeWalt products. They have a wide selection of tools and accessories available, and you can also get help from their knowledgeable staff.
- Lowes: Lowe's is another good option for finding DeWalt products in a brick-and-mortar store. They have a wide selection of tools and accessories available, and you can also get help from their knowledgeable staff.
- eBay: eBay is a good option if you're looking for a used DeWalt DCN692B or spare parts. You can often find them for a fraction of the price of new.
I hope this helps!
DeWalt DCN692B Problems and Solutions
The DeWalt DCN692B is a powerful and versatile brad nailer that is perfect for a variety of projects. However, like any tool, it can experience problems from time to time. Here are some common issues and solutions for the DeWalt DCN692B:
Problem: The nailer jams frequently. Solution:
- Make sure you are using the correct fastener and collation type for your tool. The DCN692B is designed to use 18 gauge brad nails with a collated strip. If you are using the wrong fasteners, this can cause the nailer to jam.
- Clear the jam. If the nailer is already jammed, you will need to clear the jam before you can use it again. To do this, follow these steps:
- Turn off the nailer and disconnect the air hose.
- Remove the magazine from the nailer.
- Use a nail puller to remove the jammed nail.
- Reinsert the magazine and reconnect the air hose.
- Check the air pressure. The DCN692B requires an air pressure of 90-120 psi. If the air pressure is too low, this can also cause the nailer to jam.
Problem: The nails are not sinking fully. Solution:
- Make sure the nailer is getting enough air. If the air pressure is too low, the nails will not sink fully.
- Check the depth adjustment. The DCN692B has a depth adjustment that allows you to control how deep the nails sink. Make sure the depth adjustment is set to the correct setting for the material you are working with.
- Use the correct nails. The DCN692B is designed to use 18 gauge brad nails with a collated strip. If you are using the wrong nails, this can also cause the nails to not sink fully.
Problem: The nailer is not firing. Solution:
- Make sure the nailer is turned on.
- Check the air pressure. If the air pressure is too low, the nailer will not fire.
- Make sure the magazine is loaded with nails.
- Clear the jam. If the nailer is jammed, you will need to clear the jam before you can use it again. To do this, follow the steps above.
If you have tried the solutions above and the problem persists, you may need to contact DeWalt customer service for further assistance.
Additional tips:
- To prevent jams, it is important to keep the nailer clean and free of debris.
- You should also inspect the nails regularly for damage. If the nails are damaged, this can also cause the nailer to jam.
- It is a good idea to lubricate the nailer regularly. This will help to keep the moving parts working smoothly and prevent jams.
I hope this helps!
DeWalt DCN692B Manual
Safety Information
- Read and understand all safety warnings and instructions before using this tool.
- Wear safety glasses and hearing protection at all times when using this tool.
- Wear a dust mask if working in dusty conditions.
- Keep your work area clean and well-lit.
- Do not use this tool if it is damaged or malfunctioning.
- Keep children and bystanders away from the work area.
Before Use
- Make sure that the battery is properly charged before using the tool.
- Load the magazine with nails of the correct length and gauge.
- Adjust the depth of the nail set according to the material you are working with.
Troubleshooting
- If the tool is not firing, check to make sure that the battery is properly charged and that the magazine is loaded with nails.
- If the tool is jamming, try clearing the jam by following the instructions in the manual.
- If the tool is overheating, let it cool down before using it again.
Maintenance
- Clean the tool regularly with a dry cloth.
- Do not use any harsh chemicals or solvents to clean the tool.
- Inspect the tool regularly for signs of wear or damage.
- Replace any worn or damaged parts immediately.
Warranty
This tool is covered by a 3-year limited warranty. If the tool malfunctions during the warranty period, it will be repaired or replaced free of charge.
Contact Information
For more information on this tool, please contact DeWalt customer service at:
- Phone: 1-800-433-9258
- Email: [email protected]
- Website: www.dewalt.com
Additional Information
- This tool is designed for use with 20V MAX* DEWALT batteries.
- The tool can drive nails from 2 to 3-1/2 inches long.
- The tool has a dual-speed trigger for more control.
- The tool has a dry-fire lockout to prevent damage to the tool when the magazine is empty.
- The tool has a tool-free depth adjustment for precise nail placement.
Thank you for choosing DeWalt!
Comments
Post a Comment